Release Notes

Version 4.1.2.12

Build Date: February 02, 2024

Fixed:

  • [SLP][Testing] Unchanging/unmoving Objective Zoom during Lens Switching testing.
  • [SLP][Testing] Lens Switching testing halt when running on Ultraviolet lightpath with on Live Stream.
  • [SLP][Testing] Blurry image resulting from Lens Switching testing.
  • [SLP][Flat Field Correction] The prompt to switch to Visible lightpath when calibrating Bad Pixel Value on Ultraviolet lightpath.
  • [Control Panel] Inaccurate display of slider state.

 

Version 4.1.1.2

Build Date: November 30, 2023

Improved:

  • Storage Calibration to allow calibration result download in CSV format.
  • Software to work when using basic ImagerLink with minimal features.
  • Log when failing to access all shared folders.
  • [Vector Editor] Predefined Vector position row to disable deletion.
  • Backup to include waypoint file during restoration.

Added:

  • MFI (Multi Fluorescence Imager) feature.
  • SLP (Single Light Path) feature.
  • [Log] Information when FIS is off.
  • [Log] Information when failing to load AppConfig.xml in ImagerLink.
  • [Log] Information when another program uses a selected port.
  • [Log] Information when active MQ is off.
  • [Log] Information when RIP failed to connect to ROCK MAKER database.
  • Iteration feature to reliability testing.
  • A configurable Auto Illumination feature.

Changed:

  • Installer from Linux to Windows.
  • The default port of web service to 5200.
  • Instrument type from FT400 to RI360.
  • Configuration folder’s path from FT400-UV to RI360-UV.
  • Database name from MTI_FT400 to RockImager.
  • Default password of ROCK IMAGER software.
  • [System Overview] Main Door status on the Storage panel to only display on hardware with main door sensor.

Fixed:

  • System not displaying any information regarding the Carrier on the diagnostic results.
  • [Vector Editor] Disabled “Add New Row” feature when selecting Custom Vector copied from Predefined Vector.
  • [Vector Editor] Incorrect name of newly added position row.
  • Incorrect tab name on Testing page.
  • [Installer] ROCK IMAGER V4 upgrade failure.
  • [Initial Configuration][Suite] Missing "Username" and "Password" on the shared file location settings.
  • [Initial Configuration] Failure to apply settings after defining Windows Authentification’s value without filling in ROCK MAKER Database Configuration credentials.
  • [Default Imaging Settings][UV] Blank page appearing when changing Drop 2 objective on the Override Zoom settings.
  • [Log] System not displaying error status for failed authentication in RIP log.
  • [Store & Retrieve] Error when executing "Scan Storage" on a hotel where all slots were disabled.
  • [Storage Auto Calibration] Undisplayed "Vector Deviation" results when running auto-calibration using "Proximity Sensor" mode.
  • [Reliability Testing] Failure to execute testing on a 2-slot height.
  • Warning message for storage referring to free slot capacity instead of occupied slots.
  • Expanding carrier failure after restarting RockImagerV4 service.
  • System skipping slots set as transit points during reliability testing.
  • [User Management] Failure to generate OTP for newly created users.
  • [Imager] Autofocus feature producing only one node on the Focus Graph.
  • [RM Integration] Discrepancy between the database and displayed values when changing the out-of-range maximum/minimum value on the config.
  • [RM Integration] Failure to set Exposure despite the correct value.
  • [RM Integration] [Imaging Settings] Editable Brightness field when using Drop or Plate Auto Exposure.
  • [Tools] [Testing] Failure to change Lightpath in Control Panel.
  • Failure to stop Suite service when the camera was disconnected.
  • [Configuration] Malfunctioning ImagerContact simulation when the config value was set to “True”.
  • [Vector Editor] Failure to rename Position row.
  • Crashing PSR when moving to the safe position.
  • [Temperature Control] Incorrect slider position upon pressing the Previous button when the slider was at the end position.
  • [Imager] Disabled Clear All Drop Locations button on other experiments after executing it once.
  • [Imager] Unexpected stop of imaging task when using identical Override Zoom values.
  • [Settings] [Imager] Malfunctioning Pixel Size Calibration when adjusting the “# of Squares” value after drawing a line.
  • [License] Normally running system with an expired permanent license.
  • [Preferences] [Single Scanning Method] Halted plate scanning when the barcode scanner didn’t detect a plate in an empty slot in Load Port.

 

Related Topic

ROCK IMAGER 4.1