Status Bar

The Status Bar at the bottom of the software screen provides instantaneous information about the system’s operating parameters. Click each icon to expand and see more details.

Status Bar

Item	Description
Imaging Modes	ROCK IMAGER® has two operational modes: Auto Mode and Manual Mode. Auto Mode: This is the normal operating mode. ROCK IMAGER® images your plates based on the schedules defined in ROCK MAKER. Manual Mode: It allows you to initiate imaging or move a plate to an imager for inspections. Choosing this mode pauses automatic imaging schedules until you switch back to Auto Mode or after a set amount of time has elapsed. Expanded Imaging Modes Read Manual and Automatic Imaging Modes for more information.
Imager	Tells the imager's current activity, whether idle, imaging, homing, or running diagnostics. Expanded Imager Status
PSR (Plate Storage and Retrieval) Arm	Informs the current state of the Plate Sensor and PSR (also called robot arm), along with its position inside the system. When you expand the PSR Status icon, you will also see the current position coordinates of the robot arm (X, Y, and Z). Expanded PSR Arm Status
Load Port Door	The Load Port Door can have one of the following statuses. Open: The Load Port door is open. Closed: The Load Port door is closed Expanded Load Port Door Status
Storage Temperature	Tells the current temperature in the system’s storage in degrees Celsius. This value is the average of all internal temperature sensors. Expanded Storage Temperature Status
Queued Plates	Informs you of the number of plates currently in the Queued Schedules tab of the Schedule menu. Expanded Queued Plates Status
Image Processor	Tells ROCK IMAGER processor's status. ROCK IMAGER processor is used to process captured images.
Available Storage	Informs you of the current state of the available storage and the interior light in RI360 hardware.

Related Topics