Configuring System Settings

µPULSE allows you to configure the hardware settings through the SYSTEM SETTINGS menu on the Home Screen. There are five tabs in the SYSTEM SETTINGS menu: DEVICE SETTINGSDISPLAY SETTINGSPRESSURE SETTINGSCALIBRATION WIZARD and WIFI SETTINGS. Each tab includes predefined settings that you can change to meet your preferences.

 

DEVICE SETTINGS

You can customize the desired device settings for your µPULSE, if necessary.


DEVICE SETTINGS Tab

DEVICE SETTINGS Tab

Options

Description

Device Name

Determines the device name for easier identification when using the µPULSE software remotely. Tap the Device Name field, then type a name for your µPULSE.

Organization

Shows the name of the device’s organization for easier identification when using the µPULSE software remotely. Activating the license will generate the Organization field automatically.

Device Date and Time Field

Shows the device’s current time zone, date, and time. By enabling the automatic update button ON, µPULSE will update the time and date whenever it is connected to the internet. Turn OFF the automatic update to update it manually.

DISPLAY SETTINGS

You can customize the software interface’s font size in this menu.


DISPLAY SETTINGS Tab

DISPLAY SETTINGS Tab

Options

Description

Font Size

Determines the font size used in the software interface. Select SMALL, MEDIUM, or LARGE.

PRESSURE SETTINGS

µPULSE provides default pressure values for the Return Valve Pressure Default Value setting to best accommodate the membrane cutoff size of the filter chip you are using.

Important: Too much pressure could risk damaging the filter chip.


PRESSURE SETTINGS Tab

PRESSURE SETTINGS Tab

Options

Description

Return Valve Pressure Default Value

Shows the default Return Valve Pressure value for a certain membrane cutoff size of a filter chip. You can edit the value to meet your preferences.

Restore All Default

Restore button Restore Button enables you to restore the pressure values for all membrane cutoff sizes to default values..

CALIBRATION WIZARD

The Calibration Wizard menu provides you with an on screen tutorial to calibrate the volume sensor during initial installation, after moving the instrument, or anytime you experience an issue with volume accuracy.For more information, see Calibrating the Volume Sensor.


Calibration Wizard Option

Calibration Wizard Option

WIFI SETTINGS

The WIFI SETTINGS allow you to run your profile remotely by connecting the µPULSE instrument to a WiFi connection and run the software on your laptop or tablet . Tap the TURN ON button to turn on the WiFi and connect to desired network. For more information, see Monitoring the µPULSE Status from an External Device Using WiFi Network.


WIFI SETTINGS Tab

WIFI SETTINGS Tab

Related topic